Copper Brazed Plate Heat Exchanger for Boiler SS AISI 316 plates
Boiler Brazed plate heat exchanger BL26
WidthxHeight: 111x310mm, Liquid retardation amount(L): 0.025(N-2)
Hole distance: 50x250mm, Heat exchanging area (sqm): 0.026(N-2)
Weight (kg): 1.3+0.12N
Thickness of plate: 0.4mm/PC
Design temp.: -160~+225° C
Design pressure: 3.0Mpa
Test pressure: 4.5Mpa
(N means the quantity of the plates)
All the data according to the product diagram
Plate material: AISI 316L Stainless Steel
Brazing material: Pure Copper
ISO9001, CE, UL, WRAS, RoHS, CCS certified.
Width, A [mm]
Height, B [mm]
Horizontal port distance, C [mm]
Vertical port distance, D [mm]
Thickness, E [mm]
Heat exchange area (m2)
Max pressure (mpa)
The main components are the same as for the evaporator. The
refrigerant enters at top left of the exchanger as hot gas and
starts to condense on the surface of the channels until fully
condensed, and is then slightly subcooled. The process is called
"free condensation". In the enclosed condenser picture the light
and dark blue arrows show the location of the brine connections.
The refrigerant flows counter current in the opposite channel and
is cooled. The light and dark red arrows indicate the locations of
the refrigerant connections.
The plate pack is covered by cover plates. Connections are located
in the front or rear cover plate. The channel plates are corrugated
to improve heat transfer efficiency and to make them rigid.
Cover plates: Stainless steel AISI 316
Connections: Stainless steel AISI 304
Plates: Stainless steel AISI 316
Brazing material: Copper
Particulars required for quotation
To enable Baode's representative to make a specific quotation,
enquiries should be accompanied by the following particulars:
– flow rates or heat load required
– temperature program
– physical properties of liquids in question
– desired working pressure
– maximum permitted pressure drop
Advantages of brazed plate heat exchangers in Industry and
The Baode Brazed plate heat exchangers (BHE) have several
advantages over traditional heat exchangers in Industrial and
– The high heat transfer efficiency of the BHE makes it extremely
compact and also easy to install in places where space is limited.
– The unit has no gaskets and is therefore suitable in applications
where temperature and/or pressure is high e.g. in district heating.
– The Baode supply system reassures that, no matter where you are
on the globe, the BHE units are available with a very short
Short delivery time.
Know-how design and customer support